Level 3-A BALCS Inserts
"Ballistic Armor Load Carriage System" or BALCS for short. These panels have been hugely popular due mostly to the inundation of the EAGLE CIRAS cover platform since 2001. Our inserts are hermetically sealed to keep moisture out, and we make them in the RAV Paraclete platform as well, which is probably the second most popular rapid release cover platform. The popularity for our BALCS inserts stems mostly due to the fact that EAGLE doesn't make ballistic panels and although Paraclete does there is no doubt by testing results that the OEM replacement panels offered by EAS inc. under our the Evolution Armor brand name is a superior product. The numbers below speak for themselves. We offer the panels in Small - Xlarge sizes, and even make ICW flexible rifle armor  BALCS inserts, so you can throw those old hard plates away, and enjoy flexible comfort even against rifle threats.
Quantum KXP 3-A ~ This system was inspired by two very high performing materials. In quantum theory there is a notion that for every possibility that exist, in some alternate or parallel universe anything that can happen does. We certainly don't know if that's true, but there are so many different materials, deniers, material configurations out of what literally is an infinite possibility of variations that exist only a few can yield the extreme performance of the Quantum KXP 3-A. We use Spectra 2 and Kevlar XP, which is DuPon't highest performing Kevlar available that produces performance number like this:

About 1 Lbs/Sq. Ft.

9mm V-50  1901 Ft./Sec
9mm Ranger SXT 127 gr. +P+ 1651 ft./Sec
17 Gr. Frag V-50 2016 Ft./Sec and at 14.77 Oz/Sq. Ft. 2010 Ft./Sec
Thickness: 6 - 6.5mm thick
44 Magnum BFS (Back Face Signature) readings during NIJ testing 34 - 42,  37mm average
(some companies make a big deal about BFS being lower, but often they were tested before the NIJ test template change in 2005 discussed in the FBI Vs. NIJ testing article, http://www.evolutionarmor.com/testing.htm, or they are significantly heavier than 1 Lbs/Sq. Ft, but still can't achieve the ultra extreme performance the numbers above represent)
Evolutions GTX 3-A ~ This is our low cost mid range performance system, and it provides very good performance at 19.2 - 19.5 Oz/Sq. Ft. This systems is modeled after an NIJ certified 0101.06 ballistic construction. There is not too much to say except if you're short on cash this is an excellent protection for a reasonable price. This is our patent pending Evo-Flex material.

Test results at 19.2 - 19.5 oz/Sq. Ft. for threat level 3-A

17 Gr. Frag V-50 2041 Ft./Sec ~ Exceeds Military fragmentation specifications
.357 Sig V-50 1593 Ft./Sec
9mm V-50  1689 Ft./Sec
.44 magnum V-50 1601 Ft./Sec
.44 magnum BFS average 35mm average
Thickness: 8mm thick





 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Evolutions 1000 3-A ~ This is our low cost mid range performance system and it provides very good performance at 19.2 Oz/Sq. Ft and is modeled after an NIJ certified 0101.06 ballistic construction backed by DuPont. There is not too much to say except if you're short on cash this is excellent protection for a reasonable price.

19.2 - 19.5 oz/Sq. Ft.

17 Gr. Frag V-50 2041 Ft./Sec
.357 Sig V-50 1593 Ft./Sec
.44 magnum V-50 1601 Ft./Sec
.44 magnum BFS average 35mm average
Thickness: 7 - 7.5mm thick